 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TZ7-99-460B(2/4) MITSUBISHI (OPTICAL DEVICES) FU-319SPP-CV6 InGaAs PD PREAMP MODULE FOR THE 1.31 m AND 1.55 m WAVELENGTH RANGE DESCRIPTION FU-319SPP-CV6 is InGaAs pin photodiode module with GaAs preamplifier, designed for use in highspeed, long haul optical communication systems. The coaxial package contains an InGaAs pin photodiode coupled with single-mode fiber pigtail and GaAs preamplifier. FEATURES * High-sensitivity (-23dBm typ) * 5pin coaxial package * Selectable single power supply voltage (+5V or 5.2V). (InGaAs pin photodiode and GaAs preamplifier are isolated from the case.) * GaAs preamplifier with AGC function * Differential output (50 ) APPLICATION 2.5Gbps.optical receiver (OC-48, STM-16) Extended reach datacom and telecom applications Long haul optical communication systems ABSOLUTE MAXIMUM RATINGS (Tc=25 C) Parameter Symbol PD Reverse voltage VPD PD Reverse current (CW) PD Forward current (CW) Power supply voltage Operating case temperature Storage temperature Ir If VDD Tc Tstg Conditions VSS=0V VSS=0V - Rating 20 4 2 0~7 -40~+85 -40~+85 Unit V mA mA V C C TZ7-99-460B(3/4) MITSUBISHI (OPTICAL DEVICES) FU-319SPP-CV6 InGaAs PD PREAMP MODULE FOR THE 1.31 m AND 1.55 m WAVELENGTH RANGE ELECTRICAL/OPTICAL CHARACTERISTICS (Tc=25 =1.3m,VDD=5V,VSS=0V unless otherwise noted) C, Parameter Symbol Test Conditions Limits Unit Min. Typ. Max. Detection range 1000 1600 nm Responsivity(Note 1) R CW 0.7 0.8 A/W Transimpedance Zt(off) AC,f=100MHz,RL=High 1.7 k AGC_off (Note 1) Zt(on) AC,f=100MHz,RL=High 0.5 AGC_on Cutoff frequency(-3dB) fc_High 1.8 GHz AC,RL=50 fc_Low 100 kHz AC,RL=50 Average input equivalent in 6.5 pA/ AC,RL=50 ,1MHz~1.8GHz noise current density Hz Output impedance Zo (Differential output) 50 Sensitivity Pr -23 -21 dBm AC,RL=50 , NRZ, 2.48832Gbps., PRBS=2^23-1, BER=10^-10, Over load power Po 1 3 VPD=5V (Note 2) Power supply voltage VDD VSS=0V 4.75 Power supply current IDD VDD=5V Optical return loss Prtn 27 Note 1. Transimpedance value apply when AGC(Bit by bit) function is fully off. Note 2. Used post-amp bandwidth is 1.86GHz, Laser souse extinction ratio is 10dB. 5 35 5.46 60 V mA dB OPTICAL FIBER SPECIFICATION Parameter Type Mode filed dia. Cladding dia. Jacket dia. Connector return loss Limits SM 9.51 1252 0.9 typ. 40(min) Unit m m mm dB BLOCK DIAGRAM PD Bias Supply Positive Supply 0.1F 0.1F Optical input 1 VPD 2 VDD 4 VOUT Optical Fiber Lens PD Preamp 0.1F 3 VOUT 0.1F FU-319SPP-CV6 5 VSS 50 50 Electrical output TZ7-99-460B(4/4) MITSUBISHI (OPTICAL DEVICES) FU-319SPP-CV6 InGaAs PD PREAMP MODULE FOR THE 1.31 m AND 1.55 m WAVELENGTH RANGE OUTLINE DIAGRAM (FC Connector type) (Unit : mm) FU-319SPP-CV6 |
Price & Availability of FU-319SPP-CV6
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |